|
|
|
|
Training for Your Role - Estimator
Click on each tab to view the recommended I-CAR courses for each ProLevel. For training personalized for you, please log into myI-CAR and view your Training Planner.Effective July 11, 2016: GE001L01 replaces CYC01. |
|
|
CLICK ON THE TABS TO VIEW RECOMMENDED COURSES
Estimators are expected to learn and refine the following areas as they complete each
I-CAR® ProLevel™
ProLevel 1
- Write a complete and accurate damage analysis report for front, side, and rear impact damage on drivable vehicles
- Work safely around hybrid vehicles
- Analyze damage to restraint systems
- Coordinate parts ordering and scheduling
- Understand the automotive refinish process
- Diagnose simple electrical damage
- Analyze damage to advanced materials
- Identify hail, theft, and vandalism damage
ProLevel 2
- Analyze front, side, and rear impact damage on non-drivable vehicles
- Analyze damage to advanced safety systems and advanced electrical/mechanical systems
- Stationary glass damage analysis and replacement considerations
- Identify flood and fire damage
- Strongly encouraged to maintain ASE Estimator (B6) certification
ProLevel 3
- Perform a tear-down for complete damage analysis
- Analyze damage to advanced steering and suspension systems
- Strongly encouraged to obtain ASE certification, beyond the Estimator (B6) certification
- Receive role-relevant annual training
SIX WAYS TO LEARN AND TEST
| Live: Instructor-led classroom and/or in-shop training.
Online: Self-study, available 24/7.
Welding Training & Certification: Instructor-led skills training and verification testing.
Virtual: Online Instructor-led learning and interactive discussion.
Hands-On Skills Development: Hands-on practice and learning with instructor coaching.
|
|
Once I-CAR ProLevel® 1, 2 and 3 have been met, Role Reps must complete 6 credit hours of role-relevant training annually by their renewal date in order to maintain Platinum™ status. Each Role Rep in a Gold Class™ organization must meet this requirement in order for the business to maintain Gold Class status.
The following annual training options have been designated for this role. Role Reps may choose any combination of these courses to satisfy their 6 credit hours of annual training, but I-CAR recommends taking them in the order listed below.
|
 | New Technology Options |
|
| Non-ProLevel Options |
| GE050E01 Hybrid Vehicle Identification and Damage Analysis (1 Credit Hours) |
| MK001E01 Trim Removal and Installation (1 Credit Hours) |
| MK005E01 Removing Panels and Assemblies for Mechanical Access (1 Credit Hours) |
| MK010V01 Planning Mechanical Repairs (2 Credit Hours) |
| MK015E01 Understanding Vehicle Communication Networks (1 Credit Hours) |
| MK025E01 Electrical Damage Inspection (1 Credit Hours) |
| MK020V01 Electronic Systems Diagnostics and Repair (2 Credit Hours) |
| MK030E01 Electrical Theory (1 Credit Hours) |
| MK035E01 Circuit Measurements with a Digital Volt Ohm Meter (1 Credit Hours) |
| MK180E01 Troubleshooting Basic Electrical Circuits (1 Credit Hours) |
| MK185E01 Wiring and Connector Service and Repairs (1 Credit Hours) |
| MK190V01 Initialization and Calibration of Electronic Systems (2 Credit Hours) |
| MK195V01 Control Module Programming Overview (1 Credit Hours) |
| ES045L01 The Art and Science of Estimator Interactions (3 Credit Hours) |
| PM101E01 Learning Culture Overview (1 Credit Hours) |
| PM105E01 Before the Repair Starts (1 Credit Hours) |
| PM110V01 Matching the Repair to the Team (2 Credit Hours) |
| PM115E01 Workflow Essentials (1 Credit Hours) |
| PM120L01 Synchronizing Workflow through Team Communication (2 Credit Hours) |
| PM125V01 Problem Solving for Workflow Changes (2 Credit Hours) |
| PM130E01 Quality is Your Business (1 Credit Hours) |
| PM135E01 Optimizing Processes, Equipment, and Compliance (1 Credit Hours) |
| PM140V01 Developing the Team and the Business (1 Credit Hours) |
| PM145L01 Refining the Team and the Business (2 Credit Hours) |
| PM201E01 Implementing a Learning Culture (1 Credit Hours) |
| PM205E01 Hiring to Support Your Shop's Learning Culture (1 Credit Hours) |
| PM210V01 Developing New Talent (2 Credit Hours) |
| PM215E01 Improving Your Shop's Cycle Time Process (1 Credit Hours) |
| PM220E01 Gaining Efficiencies through Blueprinting (1 Credit Hours) |
| PM225E01 Strengthening Your In-Process Quality Controls (1 Credit Hours) |
| PM230E01 Speaking the KPI Language (1 Credit Hours) |
| PM235E01 Understanding Your Part in Profit and Loss (1 Credit Hours) |
| PM240E01 Building Effective Vendor and Insurer Relationships (1 Credit Hours) |
| WCS03 Welding Training & Certification: Steel GMA (MIG) Welding (6 Credit Hours) |
| WCA03 Welding Training & Certification: Aluminum GMA (MIG) Welding (6 Credit Hours) |
| SPS05 Welding Training & Certification: Steel Sectioning (6 Credit Hours) |
| SPS07 Steel Unitized Structures Technologies and Repair (3 Credit Hours) |
| GE010E01 Vehicle Construction Material Types (1 Credit Hours) |
| WCS06e Steel GMA (MIG) Welding Theory (3 Credit Hours) |
| BRZ01e MIG Brazing Theory (1 Credit Hours) |
| WCS04 Squeeze-Type Resistance Spot Welding (3 Credit Hours) |
| ADH01 Adhesive Bonding (3 Credit Hours) |
| HON10e Using Honda & Acura Service Information (1 Credit Hours) |
| HON11e Honda & Acura High-Strength Steel Repair (1 Credit Hours) |
| HON12e Honda & Acura Restraints Collision Repair (1 Credit Hours) |
| HON14e Honda & Acura Electrical Collision Repair (1 Credit Hours) |
| HON15e Honda & Acura A/C Collision Repair (1 Credit Hours) |
| HON16e Honda & Acura TPMS Collision Repair (1 Credit Hours) |
| CPS01 Corrosion Protection (3 Credit Hours) |
| MEA01 Measuring (3 Credit Hours) |
| SSS01 Structural Straightening Steel (3 Credit Hours) |
| FFR01 Full-Frame Partial Replacement (3 Credit Hours) |
| AJT01e Advanced Joining Technologies (1 Credit Hours) |
| LAM01e Laminated Steel (1 Credit Hours) |
| APR01 Aluminum Exterior Panel Repair and Replacement (3 Credit Hours) |
| SPS10 Replacement of Steel Unitized Structures (3 Credit Hours) |
| SPS11 Sectioning of Steel Unitized Structures (3 Credit Hours) |
| HAP01e Hazardous Airborne Pollutant Reduction (1 Credit Hours) |
| HWD01e Hazardous Material Storage and Disposal (1 Credit Hours) |
| REF07v Waterborne Products, Systems, and Application (3 Credit Hours) |
| REF01e Refinishing Equipment (3 Credit Hours) |
| REF02e Surface Preparation and Masking (3 Credit Hours) |
| REF04e Detailing (3 Credit Hours) |
| REF08e Refinish Material Application and Blending (2 Credit Hours) |
| BED01e Spray-On Bedliners (1 Credit Hours) |
| ISP01e Introduction to Custom Painting (1 Credit Hours) |
| ISP02e Custom Painting (1 Credit Hours) |
| AIR02e Air Conditioning - Part 1 (2 Credit Hours) |
| AIR03e Air Conditioning - Part 2 (2 Credit Hours) |
| HEA02e Cooling System Operation and Parts (2 Credit Hours) |
| HEA03e Working with Coolant and HVAC Controls (1 Credit Hours) |
| RHA01e Rear Heating and Air Conditioning Damage (1 Credit Hours) |
| STE02v Suspension Systems (3 Credit Hours) |
| STE03v Rack and Pinion and Parallelogram Steering Systems (3 Credit Hours) |
| GLA01e Moveable Glass (3 Credit Hours) |
| EXT02v Welded and Adhesively Bonded Panel Replacement (3 Credit Hours) |
| STS01e Cosmetic Straightening Steel (3 Credit Hours) |
| LSC04e Automotive Lighting (1 Credit Hours) |
| WNW01e Wind Noise and Water Leaks (3 Credit Hours) |
| EXT03e Bolted-On Exterior Panels - Part 1 (2 Credit Hours) |
| EXT04e Bolted-On Exterior Panels - Part 2 (2 Credit Hours) |
| TRM02e Removing and Installing Hardware Interior Trim (3 Credit Hours) |
| TRM03e Removing and Installing Exterior Trim, Pinstripes, and Decals (3 Credit Hours) |
| CRU01e Adaptive Cruise Control (1 Credit Hours) |
| CWS01e Collision Warning Systems (1 Credit Hours) |
| ESC01 Electronic Stability Control Systems Overview (1 Credit Hours) |
| INH01e Induction Heaters (1 Credit Hours) |
| LSC02e Batteries (2 Credit Hours) |
| LSC03e Starting And Charging Systems (1 Credit Hours) |
| UVC01e Ultraviolet Curing Technologies (1 Credit Hours) |
| SPS06v Full-Frame Replacement (3 Credit Hours) |
| GEN01v Collision Repair Overview for the Chevrolet Corvette Z06 (3 Credit Hours) |
| FOM01 Automotive Foams (3 Credit Hours) |
| GLA01 Movable Glass (3 Credit Hours) |
| STS01 Cosmetic Straightening Steel (3 Credit Hours) |
| STE02 Suspension Systems (3 Credit Hours) |
| STE03 Rack and Pinion and Parallelogram Steering Systems (3 Credit Hours) |
| STE04 Wheel Alignment and Diagnostic Angles (6 Credit Hours) |
| REF01 Refinishing Equipment (3 Credit Hours) |
| REF02 Surface Preparation and Masking (3 Credit Hours) |
| REF04 Detailing (3 Credit Hours) |
| REF07 Waterborne Products, Systems, and Application (3 Credit Hours) |
| REF09 Color Theory, Mixing Toners, and Tinting (3 Credit Hours) |
| REF10 Understanding and Preventing Refinish Defects (3 Credit Hours) |
| EXT02 Welded and Adhesively Bonded Panel Replacement (3 Credit Hours) |
| WNW01 Wind Noise and Water Leaks (3 Credit Hours) |
| BRA01 Brakes (3 Credit Hours) |
| SPS06 Full-Frame Replacement (3 Credit Hours) |
| DRT01 Drivetrains and Engine Mounts (6 Credit Hours) |
| ELE02 Diagnosis, Testing, and Repair of Common Electrical Loads (6 Credit Hours) |
| ELE03 Fault Code Retrieval, Diagnosis, and Testing Electronic Systems (6 Credit Hours) |
| FUE01 Fuel and Exhaust Systems (3 Credit Hours) |
| RES01 Restraints (6 Credit Hours) |
| RES02 Advanced Restraint Systems (3 Credit Hours) |
| PWR01 Power Accessories (6 Credit Hours) |
| ABR01 Anti-Lock Brakes and Traction Control Systems (6 Credit Hours) |
|
| ProLevel 1 Options |
| ALT04e Alternative Fuel Vehicle Damage Analysis (1 Credit Hours) |
| ALT05e Alternative Fuel Vehicle Safety (2 Credit Hours) |
| DAM05e Aluminum Panels and Structures Damage Analysis (3 Credit Hours) |
| DAM08e Advanced Material Damage Analysis (3 Credit Hours) |
| DAM13e Basic Electronics Damage Analysis (2 Credit Hours) |
| WKR01 Hazardous Materials, Personal Safety, and Refinish Safety (3 Credit Hours) |
| DAM09e Hail, Theft, Vandalism Damage Analysis (3 Credit Hours) |
| DAM10e Exterior Panels Damage Analysis (3 Credit Hours) |
| DAM11e Restraint Systems Damage Analysis (3 Credit Hours) |
| RCY01e Recycled Parts for Collision Repair (3 Credit Hours) |
| DAM01e Vehicle Identification, Estimating Systems, and Terminology (3 Credit Hours) |
| ALT03 Alternative Fuel Vehicle Damage Analysis and Safety (3 Credit Hours) |
| GE001L01 Understanding the Cycle Time Process (3 Credit Hours) |
| DAM01 Vehicle Identification, Estimating Systems, and Terminology (3 Credit Hours) |
| DAM05 Aluminum Panels and Structures Damage Analysis (3 Credit Hours) |
| DAM08 Advanced Material Damage Analysis (3 Credit Hours) |
| DAM09 Hail, Theft, Vandalism Damage Analysis (3 Credit Hours) |
| DAM10 Exterior Panels Damage Analysis (3 Credit Hours) |
| DAM11 Restraint Systems Damage Analysis (3 Credit Hours) |
| RCY01 Recycled Parts for Collision Repair (3 Credit Hours) |
|
| ProLevel 2 Options |
|
| ProLevel 3 Options |
|
| I-CAR Industry Training Alliance Options |
| -3M Panel Bonding Adhesive Solutions (3 Credit Hours) |
| -3M Plastics and Composites Repair System (4 Credit Hours) |
| -3M Seam Sealers and Corrosion Protection (1 Credit Hours) |
| -3M Paint Preparation for Productivity - Online (2 Credit Hours) |
| -3M Paint Defect Removal and Polish - Online (1 Credit Hours) |
| -3M Plastic Repair - Online (2 Credit Hours) |
| -3M Corrosion Protection, Seam Sealers and NVH - Online (1 Credit Hours) |
| -3M Aluminum and Steel Panel Replacement Methods - Online (2 Credit Hours) |
| -3M Dent Repair - Online (1 Credit Hours) |
| -3M Industry Night- Corrosion Protection (1 Credit Hours) |
| -AKZONOBEL Collision Administrative Processes (10 Credit Hours) |
| -AKZONOBEL Increasing Closing Ratios (4 Credit Hours) |
| -AKZONOBEL Reducing Cycle Time (5 Credit Hours) |
| -AKZONOBEL Paint Material Management (4 Credit Hours) |
| -AKZONOBEL Maximizing CSI (4 Credit Hours) |
| -AKZONOBEL Business to Business Marketing II (7 Credit Hours) |
| -AKZONOBEL Estimating Consistency II (7 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision Practical Boot Camp (18 Credit Hours) |
| -AKZONOBEL Process Centered Environment Practical Boot Camp (18 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision - Introduction to Process Centered Environments (3 Credit Hours) |
| -AKZONOBEL A Tourists Guide - Introduction to Process Centered Environments (3 Credit Hours) |
| -AKZONOBEL 5S Toyota Production System for Collision - Implementing 5S (3 Credit Hours) |
| -AKZONOBEL Avoid Excess Baggage - Implementing 5S (3 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision - Principles of Continuous Improvement (4 Credit Hours) |
| -AKZONOBEL Upgrade to First Class - Principles of Continuous Improvement (4 Credit Hours) |
| -AKZONOBEL Rules of the Road – Standardization and Visual Management (4 Credit Hours) |
| -AKZONOBEL Cycle-time Processing Reduction (CPR) (7 Credit Hours) |
| -AKZONOBEL PCE Ready (3 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision - Repair Planning (6 Credit Hours) |
| -AKZONOBEL Implementing Repair Planning (6 Credit Hours) |
| -AKZONOBEL Optimizing Repair Planning with PCE (4 Credit Hours) |
| -AKZONOBEL Optimizing Repair Planning with TPS-C (4 Credit Hours) |
| -AKZONOBEL Repair Planning Boot Camp (17 Credit Hours) |
| -BASF Paint and Material Profitability (7 Credit Hours) |
| -BASF Estimating for Profit (7 Credit Hours) |
| -BASF Advanced Production Management (7 Credit Hours) |
| -BASF Marketing and Insurer Relations (7 Credit Hours) |
| -BASF Measuring & Improving Performance (7 Credit Hours) |
| -BASF Paint Department Productivity (7 Credit Hours) |
| -BASF Organizational Structure (7 Credit Hours) |
| -BASF Delivering Complete Customer Satisfaction (7 Credit Hours) |
| -BASF Get the Keys (7 Credit Hours) |
| -CHIEF Advanced Frame Analysis (13 Credit Hours) |
| -CHIEF Structural Damage Analysis (18 Credit Hours) |
| -CHIEF Computerized Measuring Training (12 Credit Hours) |
| -CHIEF Advanced Steering and Suspension Analysis (13 Credit Hours) |
| -CHIEF Design Based Repair (14 Credit Hours) |
| -CHIEF 6 Hour Computerized Measuring (6 Credit Hours) |
| -CHIEF Aluminum Damage Analysis & Repair Technology (7 Credit Hours) |
| -CHIEF Joining Technologies (7 Credit Hours) |
| -CHIEF Blueprinting Structual Damage (7 Credit Hours) |
| -AXALTA RPM Customer Service Representative (7 Credit Hours) |
| -AXALTA RPM Lean Foundations (7 Credit Hours) |
| -AXALTA RPM Advisory Selling (8 Credit Hours) |
| -Axalta RPM General Manager - Financial Management (4 Credit Hours) |
| -Axalta RPM General Manager - Process Standardization and Improvement (4 Credit Hours) |
| -Axalta Group 01 – Customer Service Representative - Online (2 Credit Hours) |
| -Axalta Group 02 – Painting for the Estimator - Online (3 Credit Hours) |
| -Axalta Group 03 – Repair Planning - Online (2 Credit Hours) |
| -Axalta Group 04 – Selling Activities - Online (2 Credit Hours) |
| -Axalta Group 05 – Body Activities - Online (2 Credit Hours) |
| -Axalta Group 06 – Delivery Activities - Online (2 Credit Hours) |
| -Axalta RPM General Manager - Recruiting, Hiring, and Training (7 Credit Hours) |
| -Axalta RPM Advanced Estimating Utilizing OEM Repair Procedures (7 Credit Hours) |
| -Axalta RPM Production Management 2.0 (7 Credit Hours) |
| -Axalta RPM Refining Selling Techniques (7 Credit Hours) |
| -Axalta RPM Delivering Exceptional Customer Service (7 Credit Hours) |
| -AXALTA Refinishing Today (8 Credit Hours) |
| -FOX VALLEY TECH CDAT Intro-To-Estimating (20 Credit Hours) |
| -FOX VALLEY TECH CDAT Non-Structural Repair Decisions (32 Credit Hours) |
| -FOX VALLEY TECH CDAT Analyzing & Estimating Structural Damage (32 Credit Hours) |
| -GM Electrical/Electronic Stage 1 (4 Credit Hours) |
| -KENT Restoring OEM Corrosion Protection (4 Credit Hours) |
| -KENT Automotive Body Shop Safety (4 Credit Hours) |
| -LORD FUSOR 002 Bumper Repair (1 Credit Hours) |
| -LORD FUSOR 003 Composite Repair and Bonding (1 Credit Hours) |
| -LORD FUSOR 006 Sealing and Sound Control (2 Credit Hours) |
| -LORD FUSOR 008 Structural and Mechanical Bonding (2 Credit Hours) |
| -MARTIN SENOUR Improving Workshop Efficiency (7 Credit Hours) |
| -MARTIN SENOUR Achieving Service Excellence (6 Credit Hours) |
| -MARTIN SENOUR Estimating Solutions For Profit (7 Credit Hours) |
| -MARTIN SENOUR Achieving Service Excellence Basics (2 Credit Hours) |
| -PORSCHE P52 - 911 (991) Body & Structural Repair (22 Credit Hours) |
| -PRESTA Professional Headlight Restoration (1 Credit Hours) |
| -PRESTA Interior Detailing (1 Credit Hours) |
| -PRESTA Exterior Detailing (1 Credit Hours) |
| -PPG MVP Production and Cycle Time Management (15 Credit Hours) |
| -PPG MVP Green Belt Training (33 Credit Hours) |
| -PPG MVP Business in the 21st Century (6 Credit Hours) |
| -PPG MVP Leading Change (6 Credit Hours) |
| -PPG MVP Administrative Management (7 Credit Hours) |
| -PPG MVP The Art of Communication (15 Credit Hours) |
| -PPG MVP The Evolution of Selling (15 Credit Hours) |
| -PPG MVP Accelerated Sales & Marketing (15 Credit Hours) |
| -PPG MVP Fundamentals of Estimating (7 Credit Hours) |
| -PPG MVP Paint Shop Performance (7 Credit Hours) |
| -PPG MVP Advanced Estimating (14 Credit Hours) |
| -PPG MVP Parts Management (7 Credit Hours) |
| -PPG MVP Financial Fundamentals for Collision Success (7 Credit Hours) |
| -PRO SPOT i4 Resistance Spot Welding & MIG Steel Welding (9 Credit Hours) |
| -SEM Plastic & Bumper Repair and Refinishing Certification (2 Credit Hours) |
| -SEM Adhesive, Rivet, and Weld Bonding (2 Credit Hours) |
| -SEM School (15 Credit Hours) |
| -SEM Automotive Corrosion Protection (4 Credit Hours) |
| -SEM Automotive Foams and Sound Dampening (2 Credit Hours) |
| -SAINT-GOBAIN Metal Panel and Weld Bond Best Practices (2 Credit Hours) |
| -SAINT-GOBAIN Estimator PSS (Professional Selling Skills) Training (3 Credit Hours) |
| -SAINT-GOBAIN Best Practices Seam Sealers (1 Credit Hours) |
| -SAINT-GOBAIN School (16 Credit Hours) |
| -SAINT-GOBAIN Aluminum Best Practices (3 Credit Hours) |
| -SAINT-GOBAIN Collision Center Best Practices (3 Credit Hours) |
| -AXALTA Refinishing Today (8 Credit Hours) |
| -AXALTA Refinishing Today (8 Credit Hours) |
| -SHERWIN-WILLIAMS Improving Workshop Efficiency (7 Credit Hours) |
| -SHERWIN-WILLIAMS Achieving Service Excellence (6 Credit Hours) |
| -SHERWIN-WILLIAMS Estimating Solutions For Profit (7 Credit Hours) |
| -SHERWIN-WILLIAMS Achieving Service Excellence Basics (2 Credit Hours) |
| -POLYVANCE/USC Introduction to Nitrogen Plastic Welding (3 Credit Hours) |
| -POLYVANCE Plastic Repair & Refinishing PR-02 (13 Credit Hours) |
| -POLYVANCE Headlight Repair PR-03 - Online (1 Credit Hours) |
| -POLYVANCE One-Day Plastic Repair & Refinishing PR-04 (7 Credit Hours) |
| -POLYVANCE Estimating Plastic Repair EPR-01 - Online (2 Credit Hours) |
| -TESLA Model S and Model X Mechanical, Electrical, Trim – Online (2 Credit Hours) |
| -TESLA Structural Repair Package - Online (3 Credit Hours) |
| -TESLA Electrical Safety - Chapters 1-4 - Online (1 Credit Hours) |
| -TESLA Model S and X Mechanical, Electrical, Trim (28 Credit Hours) |
| -TESLA Model 3: Mechanical, Electrical and Trim - Online (1 Credit Hours) |
| -Matrix Wand 3D Blueprinting & Repair System - 2 Day (12 Credit Hours) |
| -Matrix Wand 3D Blueprinting & Repair System - 1 Day (6 Credit Hours) |
| -Matrix Wand 3D Blueprinting & Repair System - Online (1 Credit Hours) |
| -Volkswagen High-Strength Steel Repair Processes (16 Credit Hours) |
| -Volkswagen Structural Repairs (13 Credit Hours) |
| -Volkswagen Body Alignment (13 Credit Hours) |
| -Volkswagen Collision Welding Technology (13 Credit Hours) |
| -Volkswagen Jetta Hybrid Collision Repairs (7 Credit Hours) |
| -Volkswagen Beetle and Beetle Cabriolet (7 Credit Hours) |
| -Volkswagen Golf Mk 7 (7 Credit Hours) |
| -WURTH Corrosion Protection: Understanding Corrosion & HVLP System (7 Credit Hours) |
|
In order for a business to achieve or maintain Gold Class™ status, Non-Role Reps must complete 6 credit hours of role-relevant training annually by their business's Gold Class renewal date.
The following annual training options have been designated for this role. Non-Role Reps may choose any combination of these courses to satisfy their 6 credit hours of annual training, but I-CAR recommends taking them in the order listed below.
|
| ProLevel 1 Options |
| ALT04e Alternative Fuel Vehicle Damage Analysis (1 Credit Hours) |
| ALT05e Alternative Fuel Vehicle Safety (2 Credit Hours) |
| DAM05e Aluminum Panels and Structures Damage Analysis (3 Credit Hours) |
| DAM08e Advanced Material Damage Analysis (3 Credit Hours) |
| DAM13e Basic Electronics Damage Analysis (2 Credit Hours) |
| WKR01 Hazardous Materials, Personal Safety, and Refinish Safety (3 Credit Hours) |
| DAM09e Hail, Theft, Vandalism Damage Analysis (3 Credit Hours) |
| DAM10e Exterior Panels Damage Analysis (3 Credit Hours) |
| DAM11e Restraint Systems Damage Analysis (3 Credit Hours) |
| RCY01e Recycled Parts for Collision Repair (3 Credit Hours) |
| DAM01e Vehicle Identification, Estimating Systems, and Terminology (3 Credit Hours) |
| ALT03 Alternative Fuel Vehicle Damage Analysis and Safety (3 Credit Hours) |
| GE001L01 Understanding the Cycle Time Process (3 Credit Hours) |
| DAM01 Vehicle Identification, Estimating Systems, and Terminology (3 Credit Hours) |
| DAM05 Aluminum Panels and Structures Damage Analysis (3 Credit Hours) |
| DAM08 Advanced Material Damage Analysis (3 Credit Hours) |
| DAM09 Hail, Theft, Vandalism Damage Analysis (3 Credit Hours) |
| DAM10 Exterior Panels Damage Analysis (3 Credit Hours) |
| DAM11 Restraint Systems Damage Analysis (3 Credit Hours) |
| RCY01 Recycled Parts for Collision Repair (3 Credit Hours) |
|
| ProLevel 2 Options |
|
| ProLevel 3 Options |
|
| New Technology Options |
|
| Non-ProLevel Options |
| GE050E01 Hybrid Vehicle Identification and Damage Analysis (1 Credit Hours) |
| MK001E01 Trim Removal and Installation (1 Credit Hours) |
| MK005E01 Removing Panels and Assemblies for Mechanical Access (1 Credit Hours) |
| MK010V01 Planning Mechanical Repairs (2 Credit Hours) |
| MK015E01 Understanding Vehicle Communication Networks (1 Credit Hours) |
| MK025E01 Electrical Damage Inspection (1 Credit Hours) |
| MK020V01 Electronic Systems Diagnostics and Repair (2 Credit Hours) |
| MK030E01 Electrical Theory (1 Credit Hours) |
| MK035E01 Circuit Measurements with a Digital Volt Ohm Meter (1 Credit Hours) |
| MK180E01 Troubleshooting Basic Electrical Circuits (1 Credit Hours) |
| MK185E01 Wiring and Connector Service and Repairs (1 Credit Hours) |
| MK190V01 Initialization and Calibration of Electronic Systems (2 Credit Hours) |
| MK195V01 Control Module Programming Overview (1 Credit Hours) |
| ES045L01 The Art and Science of Estimator Interactions (3 Credit Hours) |
| PM101E01 Learning Culture Overview (1 Credit Hours) |
| PM105E01 Before the Repair Starts (1 Credit Hours) |
| PM110V01 Matching the Repair to the Team (2 Credit Hours) |
| PM115E01 Workflow Essentials (1 Credit Hours) |
| PM120L01 Synchronizing Workflow through Team Communication (2 Credit Hours) |
| PM125V01 Problem Solving for Workflow Changes (2 Credit Hours) |
| PM130E01 Quality is Your Business (1 Credit Hours) |
| PM135E01 Optimizing Processes, Equipment, and Compliance (1 Credit Hours) |
| PM140V01 Developing the Team and the Business (1 Credit Hours) |
| PM145L01 Refining the Team and the Business (2 Credit Hours) |
| PM201E01 Implementing a Learning Culture (1 Credit Hours) |
| PM205E01 Hiring to Support Your Shop's Learning Culture (1 Credit Hours) |
| PM210V01 Developing New Talent (2 Credit Hours) |
| PM215E01 Improving Your Shop's Cycle Time Process (1 Credit Hours) |
| PM220E01 Gaining Efficiencies through Blueprinting (1 Credit Hours) |
| PM225E01 Strengthening Your In-Process Quality Controls (1 Credit Hours) |
| PM230E01 Speaking the KPI Language (1 Credit Hours) |
| PM235E01 Understanding Your Part in Profit and Loss (1 Credit Hours) |
| PM240E01 Building Effective Vendor and Insurer Relationships (1 Credit Hours) |
| WCS03 Welding Training & Certification: Steel GMA (MIG) Welding (6 Credit Hours) |
| WCA03 Welding Training & Certification: Aluminum GMA (MIG) Welding (6 Credit Hours) |
| SPS05 Welding Training & Certification: Steel Sectioning (6 Credit Hours) |
| SPS07 Steel Unitized Structures Technologies and Repair (3 Credit Hours) |
| GE010E01 Vehicle Construction Material Types (1 Credit Hours) |
| WCS06e Steel GMA (MIG) Welding Theory (3 Credit Hours) |
| BRZ01e MIG Brazing Theory (1 Credit Hours) |
| WCS04 Squeeze-Type Resistance Spot Welding (3 Credit Hours) |
| ADH01 Adhesive Bonding (3 Credit Hours) |
| HON10e Using Honda & Acura Service Information (1 Credit Hours) |
| HON11e Honda & Acura High-Strength Steel Repair (1 Credit Hours) |
| HON12e Honda & Acura Restraints Collision Repair (1 Credit Hours) |
| HON14e Honda & Acura Electrical Collision Repair (1 Credit Hours) |
| HON15e Honda & Acura A/C Collision Repair (1 Credit Hours) |
| HON16e Honda & Acura TPMS Collision Repair (1 Credit Hours) |
| CPS01 Corrosion Protection (3 Credit Hours) |
| MEA01 Measuring (3 Credit Hours) |
| SSS01 Structural Straightening Steel (3 Credit Hours) |
| FFR01 Full-Frame Partial Replacement (3 Credit Hours) |
| AJT01e Advanced Joining Technologies (1 Credit Hours) |
| LAM01e Laminated Steel (1 Credit Hours) |
| APR01 Aluminum Exterior Panel Repair and Replacement (3 Credit Hours) |
| SPS10 Replacement of Steel Unitized Structures (3 Credit Hours) |
| SPS11 Sectioning of Steel Unitized Structures (3 Credit Hours) |
| HAP01e Hazardous Airborne Pollutant Reduction (1 Credit Hours) |
| HWD01e Hazardous Material Storage and Disposal (1 Credit Hours) |
| REF07v Waterborne Products, Systems, and Application (3 Credit Hours) |
| REF01e Refinishing Equipment (3 Credit Hours) |
| REF02e Surface Preparation and Masking (3 Credit Hours) |
| REF04e Detailing (3 Credit Hours) |
| REF08e Refinish Material Application and Blending (2 Credit Hours) |
| BED01e Spray-On Bedliners (1 Credit Hours) |
| ISP01e Introduction to Custom Painting (1 Credit Hours) |
| ISP02e Custom Painting (1 Credit Hours) |
| AIR02e Air Conditioning - Part 1 (2 Credit Hours) |
| AIR03e Air Conditioning - Part 2 (2 Credit Hours) |
| HEA02e Cooling System Operation and Parts (2 Credit Hours) |
| HEA03e Working with Coolant and HVAC Controls (1 Credit Hours) |
| RHA01e Rear Heating and Air Conditioning Damage (1 Credit Hours) |
| STE02v Suspension Systems (3 Credit Hours) |
| STE03v Rack and Pinion and Parallelogram Steering Systems (3 Credit Hours) |
| GLA01e Moveable Glass (3 Credit Hours) |
| EXT02v Welded and Adhesively Bonded Panel Replacement (3 Credit Hours) |
| STS01e Cosmetic Straightening Steel (3 Credit Hours) |
| LSC04e Automotive Lighting (1 Credit Hours) |
| WNW01e Wind Noise and Water Leaks (3 Credit Hours) |
| EXT03e Bolted-On Exterior Panels - Part 1 (2 Credit Hours) |
| EXT04e Bolted-On Exterior Panels - Part 2 (2 Credit Hours) |
| TRM02e Removing and Installing Hardware Interior Trim (3 Credit Hours) |
| TRM03e Removing and Installing Exterior Trim, Pinstripes, and Decals (3 Credit Hours) |
| CRU01e Adaptive Cruise Control (1 Credit Hours) |
| CWS01e Collision Warning Systems (1 Credit Hours) |
| ESC01 Electronic Stability Control Systems Overview (1 Credit Hours) |
| INH01e Induction Heaters (1 Credit Hours) |
| LSC02e Batteries (2 Credit Hours) |
| LSC03e Starting And Charging Systems (1 Credit Hours) |
| UVC01e Ultraviolet Curing Technologies (1 Credit Hours) |
| SPS06v Full-Frame Replacement (3 Credit Hours) |
| GEN01v Collision Repair Overview for the Chevrolet Corvette Z06 (3 Credit Hours) |
| FOM01 Automotive Foams (3 Credit Hours) |
| GLA01 Movable Glass (3 Credit Hours) |
| STS01 Cosmetic Straightening Steel (3 Credit Hours) |
| STE02 Suspension Systems (3 Credit Hours) |
| STE03 Rack and Pinion and Parallelogram Steering Systems (3 Credit Hours) |
| STE04 Wheel Alignment and Diagnostic Angles (6 Credit Hours) |
| REF01 Refinishing Equipment (3 Credit Hours) |
| REF02 Surface Preparation and Masking (3 Credit Hours) |
| REF04 Detailing (3 Credit Hours) |
| REF07 Waterborne Products, Systems, and Application (3 Credit Hours) |
| REF09 Color Theory, Mixing Toners, and Tinting (3 Credit Hours) |
| REF10 Understanding and Preventing Refinish Defects (3 Credit Hours) |
| EXT02 Welded and Adhesively Bonded Panel Replacement (3 Credit Hours) |
| WNW01 Wind Noise and Water Leaks (3 Credit Hours) |
| BRA01 Brakes (3 Credit Hours) |
| SPS06 Full-Frame Replacement (3 Credit Hours) |
| DRT01 Drivetrains and Engine Mounts (6 Credit Hours) |
| ELE02 Diagnosis, Testing, and Repair of Common Electrical Loads (6 Credit Hours) |
| ELE03 Fault Code Retrieval, Diagnosis, and Testing Electronic Systems (6 Credit Hours) |
| FUE01 Fuel and Exhaust Systems (3 Credit Hours) |
| RES01 Restraints (6 Credit Hours) |
| RES02 Advanced Restraint Systems (3 Credit Hours) |
| PWR01 Power Accessories (6 Credit Hours) |
| ABR01 Anti-Lock Brakes and Traction Control Systems (6 Credit Hours) |
|
| I-CAR Industry Training Alliance Options |
| -3M Panel Bonding Adhesive Solutions (3 Credit Hours) |
| -3M Plastics and Composites Repair System (4 Credit Hours) |
| -3M Seam Sealers and Corrosion Protection (1 Credit Hours) |
| -3M Paint Preparation for Productivity - Online (2 Credit Hours) |
| -3M Paint Defect Removal and Polish - Online (1 Credit Hours) |
| -3M Plastic Repair - Online (2 Credit Hours) |
| -3M Corrosion Protection, Seam Sealers and NVH - Online (1 Credit Hours) |
| -3M Aluminum and Steel Panel Replacement Methods - Online (2 Credit Hours) |
| -3M Dent Repair - Online (1 Credit Hours) |
| -3M Industry Night- Corrosion Protection (1 Credit Hours) |
| -AKZONOBEL Collision Administrative Processes (10 Credit Hours) |
| -AKZONOBEL Increasing Closing Ratios (4 Credit Hours) |
| -AKZONOBEL Reducing Cycle Time (5 Credit Hours) |
| -AKZONOBEL Paint Material Management (4 Credit Hours) |
| -AKZONOBEL Maximizing CSI (4 Credit Hours) |
| -AKZONOBEL Business to Business Marketing II (7 Credit Hours) |
| -AKZONOBEL Estimating Consistency II (7 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision Practical Boot Camp (18 Credit Hours) |
| -AKZONOBEL Process Centered Environment Practical Boot Camp (18 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision - Introduction to Process Centered Environments (3 Credit Hours) |
| -AKZONOBEL A Tourists Guide - Introduction to Process Centered Environments (3 Credit Hours) |
| -AKZONOBEL 5S Toyota Production System for Collision - Implementing 5S (3 Credit Hours) |
| -AKZONOBEL Avoid Excess Baggage - Implementing 5S (3 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision - Principles of Continuous Improvement (4 Credit Hours) |
| -AKZONOBEL Upgrade to First Class - Principles of Continuous Improvement (4 Credit Hours) |
| -AKZONOBEL Rules of the Road – Standardization and Visual Management (4 Credit Hours) |
| -AKZONOBEL Cycle-time Processing Reduction (CPR) (7 Credit Hours) |
| -AKZONOBEL PCE Ready (3 Credit Hours) |
| -AKZONOBEL Toyota Production System for Collision - Repair Planning (6 Credit Hours) |
| -AKZONOBEL Implementing Repair Planning (6 Credit Hours) |
| -AKZONOBEL Optimizing Repair Planning with PCE (4 Credit Hours) |
| -AKZONOBEL Optimizing Repair Planning with TPS-C (4 Credit Hours) |
| -AKZONOBEL Repair Planning Boot Camp (17 Credit Hours) |
| -BASF Paint and Material Profitability (7 Credit Hours) |
| -BASF Estimating for Profit (7 Credit Hours) |
| -BASF Advanced Production Management (7 Credit Hours) |
| -BASF Marketing and Insurer Relations (7 Credit Hours) |
| -BASF Measuring & Improving Performance (7 Credit Hours) |
| -BASF Paint Department Productivity (7 Credit Hours) |
| -BASF Organizational Structure (7 Credit Hours) |
| -BASF Delivering Complete Customer Satisfaction (7 Credit Hours) |
| -BASF Get the Keys (7 Credit Hours) |
| -CHIEF Advanced Frame Analysis (13 Credit Hours) |
| -CHIEF Structural Damage Analysis (18 Credit Hours) |
| -CHIEF Computerized Measuring Training (12 Credit Hours) |
| -CHIEF Advanced Steering and Suspension Analysis (13 Credit Hours) |
| -CHIEF Design Based Repair (14 Credit Hours) |
| -CHIEF 6 Hour Computerized Measuring (6 Credit Hours) |
| -CHIEF Aluminum Damage Analysis & Repair Technology (7 Credit Hours) |
| -CHIEF Joining Technologies (7 Credit Hours) |
| -CHIEF Blueprinting Structual Damage (7 Credit Hours) |
| -AXALTA RPM Customer Service Representative (7 Credit Hours) |
| -AXALTA RPM Lean Foundations (7 Credit Hours) |
| -AXALTA RPM Advisory Selling (8 Credit Hours) |
| -Axalta RPM General Manager - Financial Management (4 Credit Hours) |
| -Axalta RPM General Manager - Process Standardization and Improvement (4 Credit Hours) |
| -Axalta Group 01 – Customer Service Representative - Online (2 Credit Hours) |
| -Axalta Group 02 – Painting for the Estimator - Online (3 Credit Hours) |
| -Axalta Group 03 – Repair Planning - Online (2 Credit Hours) |
| -Axalta Group 04 – Selling Activities - Online (2 Credit Hours) |
| -Axalta Group 05 – Body Activities - Online (2 Credit Hours) |
| -Axalta Group 06 – Delivery Activities - Online (2 Credit Hours) |
| -Axalta RPM General Manager - Recruiting, Hiring, and Training (7 Credit Hours) |
| -Axalta RPM Advanced Estimating Utilizing OEM Repair Procedures (7 Credit Hours) |
| -Axalta RPM Production Management 2.0 (7 Credit Hours) |
| -Axalta RPM Refining Selling Techniques (7 Credit Hours) |
| -Axalta RPM Delivering Exceptional Customer Service (7 Credit Hours) |
| -AXALTA Refinishing Today (8 Credit Hours) |
| -FOX VALLEY TECH CDAT Intro-To-Estimating (20 Credit Hours) |
| -FOX VALLEY TECH CDAT Non-Structural Repair Decisions (32 Credit Hours) |
| -FOX VALLEY TECH CDAT Analyzing & Estimating Structural Damage (32 Credit Hours) |
| -GM Electrical/Electronic Stage 1 (4 Credit Hours) |
| -KENT Restoring OEM Corrosion Protection (4 Credit Hours) |
| -KENT Automotive Body Shop Safety (4 Credit Hours) |
| -LORD FUSOR 002 Bumper Repair (1 Credit Hours) |
| -LORD FUSOR 003 Composite Repair and Bonding (1 Credit Hours) |
| -LORD FUSOR 006 Sealing and Sound Control (2 Credit Hours) |
| -LORD FUSOR 008 Structural and Mechanical Bonding (2 Credit Hours) |
| -MARTIN SENOUR Improving Workshop Efficiency (7 Credit Hours) |
| -MARTIN SENOUR Achieving Service Excellence (6 Credit Hours) |
| -MARTIN SENOUR Estimating Solutions For Profit (7 Credit Hours) |
| -MARTIN SENOUR Achieving Service Excellence Basics (2 Credit Hours) |
| -PORSCHE P52 - 911 (991) Body & Structural Repair (22 Credit Hours) |
| -PRESTA Professional Headlight Restoration (1 Credit Hours) |
| -PRESTA Interior Detailing (1 Credit Hours) |
| -PRESTA Exterior Detailing (1 Credit Hours) |
| -PPG MVP Production and Cycle Time Management (15 Credit Hours) |
| -PPG MVP Green Belt Training (33 Credit Hours) |
| -PPG MVP Business in the 21st Century (6 Credit Hours) |
| -PPG MVP Leading Change (6 Credit Hours) |
| -PPG MVP Administrative Management (7 Credit Hours) |
| -PPG MVP The Art of Communication (15 Credit Hours) |
| -PPG MVP The Evolution of Selling (15 Credit Hours) |
| -PPG MVP Accelerated Sales & Marketing (15 Credit Hours) |
| -PPG MVP Fundamentals of Estimating (7 Credit Hours) |
| -PPG MVP Paint Shop Performance (7 Credit Hours) |
| -PPG MVP Advanced Estimating (14 Credit Hours) |
| -PPG MVP Parts Management (7 Credit Hours) |
| -PPG MVP Financial Fundamentals for Collision Success (7 Credit Hours) |
| -PRO SPOT i4 Resistance Spot Welding & MIG Steel Welding (9 Credit Hours) |
| -SEM Plastic & Bumper Repair and Refinishing Certification (2 Credit Hours) |
| -SEM Adhesive, Rivet, and Weld Bonding (2 Credit Hours) |
| -SEM School (15 Credit Hours) |
| -SEM Automotive Corrosion Protection (4 Credit Hours) |
| -SEM Automotive Foams and Sound Dampening (2 Credit Hours) |
| -SAINT-GOBAIN Metal Panel and Weld Bond Best Practices (2 Credit Hours) |
| -SAINT-GOBAIN Estimator PSS (Professional Selling Skills) Training (3 Credit Hours) |
| -SAINT-GOBAIN Best Practices Seam Sealers (1 Credit Hours) |
| -SAINT-GOBAIN School (16 Credit Hours) |
| -SAINT-GOBAIN Aluminum Best Practices (3 Credit Hours) |
| -SAINT-GOBAIN Collision Center Best Practices (3 Credit Hours) |
| -AXALTA Refinishing Today (8 Credit Hours) |
| -AXALTA Refinishing Today (8 Credit Hours) |
| -SHERWIN-WILLIAMS Improving Workshop Efficiency (7 Credit Hours) |
| -SHERWIN-WILLIAMS Achieving Service Excellence (6 Credit Hours) |
| -SHERWIN-WILLIAMS Estimating Solutions For Profit (7 Credit Hours) |
| -SHERWIN-WILLIAMS Achieving Service Excellence Basics (2 Credit Hours) |
| -POLYVANCE/USC Introduction to Nitrogen Plastic Welding (3 Credit Hours) |
| -POLYVANCE Plastic Repair & Refinishing PR-02 (13 Credit Hours) |
| -POLYVANCE Headlight Repair PR-03 - Online (1 Credit Hours) |
| -POLYVANCE One-Day Plastic Repair & Refinishing PR-04 (7 Credit Hours) |
| -POLYVANCE Estimating Plastic Repair EPR-01 - Online (2 Credit Hours) |
| -TESLA Model S and Model X Mechanical, Electrical, Trim – Online (2 Credit Hours) |
| -TESLA Structural Repair Package - Online (3 Credit Hours) |
| -TESLA Electrical Safety - Chapters 1-4 - Online (1 Credit Hours) |
| -TESLA Model S and X Mechanical, Electrical, Trim (28 Credit Hours) |
| -TESLA Model 3: Mechanical, Electrical and Trim - Online (1 Credit Hours) |
| -Matrix Wand 3D Blueprinting & Repair System - 2 Day (12 Credit Hours) |
| -Matrix Wand 3D Blueprinting & Repair System - 1 Day (6 Credit Hours) |
| -Matrix Wand 3D Blueprinting & Repair System - Online (1 Credit Hours) |
| -Volkswagen High-Strength Steel Repair Processes (16 Credit Hours) |
| -Volkswagen Structural Repairs (13 Credit Hours) |
| -Volkswagen Body Alignment (13 Credit Hours) |
| -Volkswagen Collision Welding Technology (13 Credit Hours) |
| -Volkswagen Jetta Hybrid Collision Repairs (7 Credit Hours) |
| -Volkswagen Beetle and Beetle Cabriolet (7 Credit Hours) |
| -Volkswagen Golf Mk 7 (7 Credit Hours) |
| -WURTH Corrosion Protection: Understanding Corrosion & HVLP System (7 Credit Hours) |
|
| |
| | |
View All ProLevels
|
|
|